FC225T Dual-Spectrum Bullet Thermal Network Camera
FC225T Dual-Spectrum Bullet Thermal Network Camera
The FC225T is a new-generation dual-spectrum thermal imaging bullet camera that integrates thermal
imaging, temperature measurement, and high-definition visible-light monitoring.
Equipped with a 12μm uncooled infrared detector and advanced industrial temperature algorithms,
it supports smoke detection, fire point analysis, dual-spectrum fusion, and intelligent alarm linkage—
providing true 24/7 security and fire prevention monitoring.
It is widely used in indoor and outdoor safety monitoring scenarios such as substations, charging
stations, warehouses, gas stations, and power facilities.
The camera supports dual-vision fusion, intelligent video analytics, multi-event alarm linkage,
and precise temperature monitoring with ±2°C accuracy.
It offers ONVIF and GB28181 compatibility, supports NVR/VMS software, and provides SDK access for
secondary development.
Technical Specifications
| Parameter | Value |
|---|---|
| Thermal Imaging Parameters | |
| Detector Type | VOx uncooled focal plane detector |
| Spectral Range | 8–14 μm |
| NETD | ≤40 mK (@25°C, F#1.0) |
| Resolution | 256 × 192 |
| Pixel Pitch | 12 μm |
| Thermal Lens Focal Length | 3.2 mm / 7 mm / 10 mm |
| Visible Light Parameters | |
| Image Sensor | 5 MP 1/2.8″ CMOS |
| Resolution | 2560 × 1920 |
| Visible Lens | 4 mm / 8 mm / 12 mm |
| Focus Mode | Fixed focus |
| IR Illumination | IR LED, max distance 30 m |
| Dual-Spectrum Fusion | |
| Fusion Mode | Supports thermal-visible fusion; detail-enhanced fusion imaging |
| Temperature Overlay | Supports overlaying temperature info onto visible image |
| Temperature Measurement | |
| Range | -20°C ~ +550°C |
| Accuracy | ±2°C or ±2% |
| Analysis Functions | Supports full-frame, spots (12), lines (2), areas (12) with alarm linkage |
| Intelligent Functions | |
| Fire Detection | Supports fire point detection |
| Smart Detection | Intrusion, line crossing, human detection, multi-event analysis |
| Audio Detection | Supports audio anomaly detection |
| Alarm Linkage | Recording / snapshot / email / alarm output / audio alarm |
| System Interfaces | |
| Power Input | DC 12V ±25% / PoE (802.3af) |
| Network Interface | 1 × RJ45 10/100M Ethernet port |
| Audio Input | 1 channel audio input |
| Audio Output | 1 channel audio output + built-in speaker |
| Alarm Input | 2 channel alarm input |
| Alarm Output | 1 channel alarm output |
| Storage | Micro SD (max 256 GB) |
| Reset Button | Supported |
| RS485 Interface | 1 × RS485 |
| General Specifications | |
| Operating Temperature & Humidity | -40°C ~ +70°C; <95% RH |
| Ingress Protection | IP66 |
| Power Consumption | Max < 6 W |
| Dimensions | 265 × 99 × 87 mm (length adjustable up to 253 mm) |
| Weight | 950 g |
